Other Functions; Important User Information; Technical Data - 3M Peltor WS SportTac Handbuch

EN

4. OTHER FUNCTIONS

power-off is indicated by a voice message:

5. IMPORTANT USER INFORMATION

The hearing protector must be worn, adjusted, cleaned and maintained in
accordance with this manual.
manufacturer's instructions for maintenance and battery replacement.
hazardous noise
manufacturer for more information.
consult the manufacturer's instructions.
charge or replace the batteries. Never replace or insert batteries with the
unit switched on. Ensure that the batteries are correctly aligned before
using the product.
The wearer should ensure that the ear-muffs are regularly inspected for
serviceability.
performance of the ear-muffs
Note: If these recommendations are not followed, attenuation may be
adversely affected leading to hearing impairment.
WARNING!
The sound from the active-volume circuit on the hearing protector may exceed
the external sound level.
IMPORTANT! For the best protection, brush aside hair around the ears so the
Operating temperature: -20 °C to +55 °

6. TECHNICAL DATA

6:1 Attenuation values, SNR (D)
The attenuation values and noise levels for the headset are tested and
approved according to EN 352-4: 2001, EN 352-6 : 2002, EN 352-8 2002 and
no. 0403).
Explanation of the attenuation data tables:
1. Weight
2. Frequency (Hz)
3. Average attenuation (dB)
4. Standard deviation (dB)
5. Expected attenuation (dB)
6:2 Input signal level/usage time for audio input J22 (E)
Maximum permitted audio signal in relation to usage time.
To prevent harmful effects on hearing, the input signal should not exceed the
of the earphone volume is measured at a level corresponding to no more than
82 dB(A) sound level.
1. Hours/day
2. Average level/electric signal X = 20 mV
he headset is switched off.
"automatic power off".
"low battery".
6