About This Manual; Intended Use And Contraindications - NDS ScaleOR Benutzerhandbuch

About This Manual

This manual is designed to assist the user with installation, setup and operation of the ScaleOR and its
associated displays. A list of displays that may be used with the ScaleOR is in the
section under General Information
2
A numbered tab on the side of the page denotes the beginning of a section.
The functional descriptions in this manual are representative of:
Part Numbers:
The part numbers are shown in table below
Firmware:
58J0079 Rev A. This version supports only the DVI and 3G-SDI input modules.
58J0079 Rev B. This version adds support for the VGA input module.
58J0079 Rev C. This version adds support for the S-Video / Composite input module.
58J0079 Rev D. Added Alternative Mode Tolerance and Auto Select on the S-Video / Composite module.
Manual Part Number 60G0541 Rev E

Intended Use and Contraindications

Intended Use:
This device is intended for use in a medical environment to deliver high quality video and graphic images.
Contraindications:
This device may not be used in the presence of flammable anesthetics mixture with air, oxygen or nitrous
oxide. Also, it is not intended for life support applications.
No part of this product may come in contact with a patient. Never touch the product and a patient at the
same time.
Warning:
Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not stare into open apertures.
For mission critical applications, we strongly recommend that a replacement unit be immediately
available.
1
on the following page.
Part Number Input Module
90T0009 DVI
90T0010 DVI
90T0011 SDI
90T0012 SDI
90T0013 VGA
90T0014 VGA
90T0015 S-Video / Composite
90T0016 S-Video / Composite
Compatible Displays
Fiber Optic Output?
No
Single Fiber
No
Single Fiber
No
Single Fiber
No
Single Fiber