Cleaning And Maintenance; After Ironing - Philips Supervapor GC6048 Bedienungsanleitung

ENGLISH
12

Cleaning and maintenance

1 Remove the mains plug from the wall socket and let the iron
cool down.
2 Wipe scale and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaner.
Keep the soleplate smooth: avoid hard contact with metal objects.
3 Clean the upper part of the appliance with a damp cloth.
4 Regularly rinse the steam tank with water. Pour out the water
after cleaning.

After ironing

C
1 Switch the steam tank and the iron off by setting both on/of
switches (E and F) to 'off', also set the temperature dial of the
iron to 0.
2 Release the pressure in the steam tank by pressing the steam
activator button until you no longer hear any steam escaping
from the appliance.
3 Remove the mains plug from the wall socket.
4 Put the iron on the iron stand (P) and let it cool down before
you put the appliance away.
Storage
1 Remove the mains plug from the wall socket, let the iron cool
down and set the steam control to position O.
2 Empty the steam tank.
C
3 Wind the mains cord round the cord storage facility (S). Push
the supply hose behind the storage clip and hand the iron on
the storage hook.
4 Use the iron storage hook with integrated hose storage clip for
safe and easy storage.
C
5 There are handgrips on either side of the steam tank for easy
transport.
6 Regularly check if the mains cord and the supply hose are still
undamaged and safe.