Checking The Initial Settings In The Ghp Outdoor Unit - Panasonic U-20GES3E5 Bedienungsanleitung

Table 3
First digit display
(3) For each display, the value can be changed by pressing the UP and DOWN keys.
When the SET keys is pressed for display
(4) Press the HOME key to end the setting process.
* Depending on the connected system and control device, the date and time may be set automatically.

5. Checking the Initial Settings in the GHP outdoor unit

(1) Select the
(2) Press the SET key to display the following:
Example:
(3) With this display, press the UP and DOWN keys to select settings including those for system address, outdoor unit
address, number of connected outdoor units, number of connected indoor units, model, gas type, and automatic
address startup.
Table 4
Status/setting display
DOWN
UP
*1: Although the value varies depending on the model, do not change.
*2: Do not change except the W Multi model.
Contents Sample setting/status display
Year
Month
Day
Hour
Minutes/seconds
, the seconds are reset to zero.
(initial settings) menu item to display
(system address setting)
System address setting
Outdoor unit address setting
Number of connected outdoor units setting
Number of connected indoor units setting
Model setting (non-modifiable)*
Gas type setting
Refrigerant setting (non-modifiable)*
Generator (setting disabled)*
Model 1 setting (non-modifiable)*
Model 2 setting (non-modifiable)*
Destination setting (non-modifiable)*
Hot water setting
Oil change time display
Single phase setting (non-modifiable)*
Tube connection check (Use for W Multi)*
Heat automatic address setting
Cool automatic address setting
EN - 7
Display meaning
18 (Year 2018)
April
First day of the month
11 AM
6th minute after the hour
.
Function
1
1
1
1
1
1
1
2