Oki LE840 Serie Handbuch Seite 106

7. SUPPLY SPECIFICATIONS
PRINT TONE FINE ADJUSTMENT VALUES BY SUPPLIES
For 203dpi model
Print
Ribbon
Mode
1
3
Thermal
transfer
type
4
5
Paper
3"/s
Vellum -2
TT1C 0
I-BEST S -2
Vellum -4
TT1C -6
I-BEST S -4
Vellum -8
TT1C -6
I-BEST S -4
Vellum 0
TT1C +2
VES-85 -4
I-BEST S 0
Print speed
6"/s 10"/s 12"/s
-2 -2 +2
0 +2 +2
0 +4 +6
-4 0 +2
-4 +2 +4
-4 +2 +4
-4 +2 unusable
-4 +6 +6
-2 unusable
0 +4 +6
+4 +6 unusable Semi-resin1
T.B.D +2 +2
0 +4 unusable Semi-resin1
E7-12
7.3 Recommended Media and Ribbon Types
Print
Remarks
energy type
This combination is not
acceptable in the case of
Wax1
10, 12ips and high
temperature environment.
In the case of 10, 12ips
and low temperature
Wax1 environment requires
a print tone adjustment
to positive direction.
Serial bar code printed
Wax1
at 12ips is unusable.
In the case of 3, 6ips
and high temperature
Wax1 environment requires
a print tone adjustment
to negative direction.
Wax1
Wax1
In the case of 3, 6ips
and high temperature
environment requires
a print tone adjustment
to negative direction.
Wax1
This combination is not
acceptable in the case of
10ips and high
temperature environment.
In the case of 3, 6ips
and high temperature
Wax1 environment requires
a print tone adjustment
to negative direction.
In the case of 3ips
and high temperature
Wax1 environment requires
a print tone adjustment
to negative direction.
In the case of 6ips
and low temperature
environment requires
a print tone adjustment
to positive direction.
Semi-resin1
This combination is not
acceptable in the case of
10, 12ips and high
temperature environment.
Semi-resin1