NORAUTO NS-X800BT Bedienungsanleitung Seite 340

1. Never disassemble or adjust the unit without any professional
guidance.
For details, please consult any professional car shop /
dealer for inquiry.
2. If the front panel or TFT monitor is dirty, please use a clean
silicone cloth and neutral detergent to wipe off the spot.
Using a rough cloth and non-neutral detergent such as
alcohol for cleaning may result in scratching or decoloration
to the monitor.
3. If any abnormal behavior of the unit is found, please refer
to trouble shooting guide of this manual. If no relevant
information is found, please Press [ RESET ] with a ball-
point pen or similar tool to resume factory default.
4. If you have parked the car in hot or cold weather for a long
time, please wait until the temperature in the car becomes
normal before operating the unit.
5. Using the car heater in low temperature environment may
result in moisture inside the unit, DO NOT use the unit in
this situation. Eject the disc and wipe off the moisture on the
disc. If the unit still doesn't work after a few hours, please
contact the service center.
6. Do not impact the LCD monitor which could cause damage.
7. To prevent damage to the screen, avoid touching it with
sharp objects.
8. To provide a clear demonstration and an alternative for
easy understanding to the operation of this unit, graphic
illustrations are used.
However, some illustrations are different from the actual
images displayed on the screen.
9. Operate the unit correctly according to this manual to
prevent unnecessary problem. The guarantee won't be valid
if the problem is caused by inappropriate operation.
10. WARNING: Please refer the information on exterior bottom
enclosure for electrical and safety information before
installing or operating the apparatus.
338