MSA Vautex Elite S Gebrauchsanleitung Seite 10

USE
10
Attaching the support belt
(8) Roughly adjust the length of the support belt from the crotch
of the protective suit.
(9) Pull the protective suit up to crotch.
(10) Attach the support belt to the waist belt of the compressed air
breathing apparatus.
(11) Adjust the length of the support belt.
The belt must be attached tightly whilst ensuring freedom of
movement.
Pulling the left glove over fully
(12) The assistant holds on to the loose hanging sleeves of the
protective suit at the support ring of the left glove system and
pulls the sleeve without creases to the side.
(13) Pull the left sleeve on fully whilst ensuring that the glove
system fits properly.
Pulling the protective suit on
(14) The assistant raises the protective suit over the compressed
air cylinders.
(15) Hold the lens up by the bottom edge using your left hand.
(16) The assistant places the head part over the helmet.
Pulling the right glove over fully
(17) The assistant holds on to the support ring of the right glove
system and pulls the sleeve without creases to the side.
(18) Pull the right sleeve on fully whilst ensuring that the glove
system fits properly.
Vautex Elite S
MSA
GB