Alarm Configuration - PeakTech 5620 Bedienungsanleitung

4.5 Alarm configuration

Open the image palette settings to set the alarm thresholds. To
adjust the values, select between upper, lower, interval and
isolation alarm. After selecting the alarm, the values can be
adjusted.
Above Alarm
Below Alarm
Interval Alarm
Insulation Alarm
Set the alarm temperature and the unit
alerts you if the temperature is higher than
the control temperature
Set the alarm temperature and the unit
alerts you when the temperature is below
the control temperature
Set the alarm temperature range (for
example 90 ° C - 150 ° C). If the
temperature is within the range (for
example 100 ° C), the device alerts you
Set the alarm temperature range (eg 90 ° C
- 120 ° C). If the target temperature is out
of range (eg 70 ° C or 125 ° C), the device
alerts you
-54-