Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3 Storage Management
To save the videos and photos which are taken, a memory card
must be inserted in the device. The memory card is included in the
delivery.
It is not possible to save video or still images while the main menu
is displayed or the thermal camera is connected to the PC.
In the device settings "Filename Header", it is possible to change
the name of the data to be saved.
4.3.1 Settings of the video recording
The video function is activated in the Camera setting.
After the video function has been activated, return to the
measurement screen to film the desired object.
After pressing the release button, the recording starts (visible at the
top of the screen). Press the release button again to stop recording.
4.3.2 Settings of the photographs
The photo function is activated in the Camera setting (see chapter
4.3.1).
To record a thermal image, press the trigger button of the thermal
camera. After the picture is taken, the picture is shown in the
display and you can choose whether the picture should be provided
with a text or a sound recording. It is also possible to subsequently
make custom settings with regard to the measuring points (see
chapter 4.1.1).
4.3.3 Display of recorded pictures / videos
The saved pictures and videos can be viewed at any time, the
folder can be found in the main menu. Use the arrow keys to switch
between the pictures and videos. If images have been provided with
a voice / sound note, it is possible to play them.
-50-
Werbung
Kapitel
Inhaltsverzeichnis
