Setting A Wi-Fi Hotspot; Bluetooth Settings - PeakTech 5620 Bedienungsanleitung

4.2.2 Setting a Wi-Fi hotspot

The hotspot feature requires the thermal camera to be connected to
a Wi-Fi network. The feature is used to create a hotspot that allows
you to connect a smartphone with the camera to control it.
Settings:
1. Select the device settings in the menu
2. Open the Wi-Fi settings
3. Activate the hotspot function
4. After activating the function "Set Hotspot" you have to change the
name and the password
Note: The password must be at least 8 characters long, otherwise it will not be possible to
complete the password change.

4.2.3 Bluetooth settings

With the Bluetooth function, it is possible to pair the thermal
Camera with a Bluetooth headset or other Bluetooth audio players.
This feature is very useful for the recorded audio data included with
the videos.
Settings:
1. Select the device settings in the settings menu
2. Open the Bluetooth settings
3. When the Bluetooth feature is activated, the thermal imager will
start searching for nearby devices
4. After the camera has been connected to an audio device, you
can play the sound during a video recording as well as playing a
video.
-49-