Charging Via The Usb Port - PeakTech 5620 Bedienungsanleitung

3. Insert the battery into the charging station, as shown below.
You can read the charge status via the indicator light on the
charging station.
Battery
Charging
Base
Front View
Side View
4. When the battery is fully charged, remove the battery from the
charging station.
5. Align the ribbed part of the battery with the notch on the camera
and insert the battery into the camera as shown below.
Ribbed Piece

3.2.1 Charging via the USB port

Note: Please ensure that the battery is properly installed in the thermal camera before
Charging the battery.
1. Open the top cover of the camera.
2. Connect the USB port and the power adapter with a USB cable.
-39-