Inhaltsverzeichnis
Werbung
SeeSnake
Tools For The Professional
TM
• Stop using the unit if it starts smoking or emitting noxious fumes.
• Remove the batteries and refer servicing to qualified service person-
nel under any of the following conditions:
• If liquid has been spilled or objects have fallen into product;
• If product does not operate normally by following the operating instruc-
tions;
• If the product has been dropped or damaged in any way;
• When the product exhibits a distinct change in performance.
If you have any questions regarding the service or repair of this machine, call
or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
On the Web: www.ridgid.com
Specific Safety Information
W ARNING: Read this operator's manual carefully before using the
SeeSnake Micro. Failure to understand and follow the contents of this manual
may result in electrical shock, fire and/or severe personal injury.
Call the Ridge Tool Company, Technical Service Department at (800) 519-
3456 if you have any questions.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
NOTE! This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of
Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Micro
®
™
Ridge Tool Company
SeeSnake Micro Safety
• Do not place SeeSnake Micro into anything or anywhere that may
contain a live electrical charge.
• FOR WALLS: For inspecting inside walls, be sure to shut off the circuit
breaker to the whole house before using the SeeSnake Micro behind any
of the walls.
• FOR PIPES: If you suspect a metal pipe could contain an electrical
charge, have a qualified electrician check the pipe before using the
SeeSnake Micro. Ground circuits, in some cases, can be returned to cast
iron pipes and cause them to be charged.
• FOR AUTOMOBILES: Be sure the automobile is not running during
inspection. Metal and liquid under the hood may be hot. Do not get oil or
gas on the imager head. Exposure to petroleum-based substances will
eventually degrade the imager head covering.
• GENERAL USE: Do not use anywhere the unit may come into exposure
with hazardous chemicals, electrical charges or moving parts. Such
situations may result in serious injury or death.
SAVE THESE INSTRUCTIONS!
Description, Specifications and
Standard Equipment
Description
The SeeSnake Micro displays live color video from an imaging sensor and
lighting source connected to a flexible cable. It can be used to look into tight
spots and beam back real-time video to a color LCD. Accessories (mirror, hook
and magnet) are included to attach to the imager head to provide application
flexibility.
Specifications
Recommended Use .................Indoor
Viewable Distance ..................1" to 12"
Power Supply ...........................4 Alkaline AA 1.5-volt batteries
Estimated Battery Life .............3 hours of continuous use
Weight ......................................1.2 lbs (0.5 kg)
Dimensions:
Length .................................7" (17.8 cm)
Width ...................................3.63" (9.2 cm)
Height .................................6.25" (15.9 cm)
Display:
Resolution ...........................160 x 234
Screen Type ........................2.5" LCD
Operating Environment:
Temperature.........................32°F to 113°F (0°C to 45°C)
Humidity ..............................5% to 95% non-condensing (display unit)
Storage Temperature ...........-4°F to 158°F (-20°C to 70°C)
Water Resistance ................Image head and extensions to 10' (260 mm)
.............................................water depth (When assembled.)
Maximum Distance ..................Optional cable extensions can be assembled
.............................................to make cable up to 30' (762 mm) long
Werbung
Kapitel
Inhaltsverzeichnis
