Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This Wall Bracket has a rotation function of front plate. Therefore the screen is turnable +/- 3° horizontally. This is an advantage for
the adjustment of the screen in the horizontal position at all time.
To permit this, you have to screw the fixing screws at medium strength (Step 6). Thereby it will be possible to adjust the screen in
the horizontal position without unscrewing the screw or a big effort at all time, which is possible without extra-tools.
With this function you can adjust by folding or unfolding of the wall bracket with your hands in a horizontal position or your desired
position. Of course you can anytime tighten all the knobs to fixing the position of display.
If the rotation function is too strong or free-moving: Thus you can regulate/control this by loosening or tightening the shown screws.
The wall mount can be swivelled 120°, tilted +/-15° and rotated +/-3°.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please contact your distributor if you have any questions.
+/- 3°
!
Please check BEFORE installation distance between mounting holes on your TV / monitor!
Horizintally
This wall mount supports the following distance between holes:
Horizontally
Vertical / Perpendicularly
200x100
200x200
S1944
300x200
300x300
400x300
400x400
ASSEMBLY MANUAL
v.17.01
CAUTION: DO NOT EXCEED
RATED LISTED WEIGHT. SERIOUS
INJURY OR PROPERTY DAMAGE
MAY OCCUR!
VESA Mounting holes
Vertical /
Perpendicularly
Display back
min. 200mm - max. 440mm
min. 100mm - max. 410mm
45kg
(99lbs)
MAX
Werbung
