Setting The Clock - Yamaha RX-E600 Bedienungsanleitung

GETTING STARTED

Setting the clock

You must set the clock before you use the timer functions.
The clock is based on a 24-hour system.
DISPLAY
STANDBY/ON
NATURAL SOUND
STANDBY/ON
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIMER ADJ
BASS
PHONES
– +
TIME ADJ
1
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
2
While the power is on, press DISPLAY to display
the time.
3
Press HOUR while holding TIME ADJ to advance
the hour setting.
• Press HOUR while holding TIME ADJ and
PRESET/BAND to reverse the hour setting.
4
Press MIN while holding TIME ADJ to advance the
minute setting.
• Press MIN while holding TIME ADJ and
PRESET/BAND to reverse the minute setting.
To display the clock
Press DISPLAY.
The current time appears for about 8 seconds, then the
normal display returns. Some buttons and controls may
not work while the current time is displayed.
Note
• In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
6
HOUR MIN
VOLUME
STEREO RECEIVER RX–E600
PRESET/BAND PRESET/TUNING
MIN
TIMER HOUR MIN
INPUT
TREBLE BALANCE
– +
R
L
PRESET/BAND
MAX