Optional Settings For Rds Functions - Yamaha RX-E600 Bedienungsanleitung

RECEIVING RDS STATIONS
Optional settings for
RDS functions
The tuner has the following functions which make use of
the RDS data service. These functions are set to ON by
default. However, you can turn these functions OFF, if so
desired.
1
1
4
4
7
PTY SEEK MODE
7
0
FREQ/RDS
FREQ/RDS MODE – PTY SEEK – START
REP
A
D
PRESET
TUNER
MD
MD
REC/PAUSE
MODE
SLEEP
1
Select the FM band by pressing TUNER.
2
Press DISPLAY to display the current time.
3
Press FREQ/RDS.
4
Each time you press PTY SEEK MODE the display
will change as follows:
1. CT = CLOCK (ON/OFF)
The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT
data on the RDS station being received.
14
POWER
2 3
2 3
5 6
5 6
8 9
8
+10 +100
PTY SEEK START
RANDOM PROG
B C
TIME
E
TAPE
DIRECTION
TUNER PRESET
TAPE
DVD
AUX
TAPE
REC/PAUSE
DUBBING START
DISPLAY
DISPLAY
VOLUME
• If the unit is tuned to an RDS station of another
country the built in clock synchronizes to the time
of that country.
• If the built-in clock is not set to the current time or
has been reset due to a power failure or other
incident, it will be set to the time specified by the
CT automatically, regardless of whether this
setting is set ON or OFF.
2. LOCAL = CT (ON/OFF)
If the RDS station being received employs the
local time (summer time, etc.) data service, its
time is displayed in the CT mode.
3. A.M. = RDS (ON/OFF)
The unit searches RDS stations instead of FM
stations in the automatic preset tuning operation
when this setting is set to ON. (Refer to page 11).
4. RT SPEED: ±0
Changes the scroll speed of the radio text.
Decrease the value to reduce the speed.
Control Range: ±0 to ±3 (Preset value: ±0)
5
Choose the function ON or OFF by pressing PTY
SEEK START, confirming it in the display. Press
PTY SEEK START repeatedly to change the value
for RT SPEED.
• If the unit is not operated for 20 seconds or more,
this mode is cancelled and the unit returns to the
frequency display. If the current station is
transmitting PS data, the unit changes to the PS
mode.
6
Press FREQ/RDS again to restore the frequency
display mode.