Before Recording; Dubbing Setting - Yamaha RX-E600 Bedienungsanleitung

Before recording

Follow the instructions as described in "Connecting the
system" on page 5 before using the MDX-E300 or KX-
E300 to record. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. Sources
connected to the AUX terminal can be recorded to tape or
MD.

Dubbing setting

There are six combinations of components. When you
select a mode, recording for mode starts and ends
automatically in a manner preset for that mode.
DIRECTION
PRESET TUNER
MD
MD
REC/PAUSE
MODE DUBBING
DUBBING
MODE
SLEEP
VOLUME
1
Select a component combination. Each time you
press DUBBING MODE, the mode changes in the
following order:
1
2
TAPE
PRESET
DVD TAPE
AUX
TAPE
REC/PAUSE
START
DUBBING
START
DISPLAY
SYSTEM CONTROL
3 Play unit
• Recording automatically starts at the beginning of
the tape. (Pressing DUBBING START
automactially rewinds the tape to the beginning)
Play unit
4
• Recording automatically starts at the beginning of
the tape. (Pressing DUBBING START
automactially rewinds the tape to the beginning)
2
Press DUBBING START to start recording.
Note
• The displays 1~4 which include the component you have
not connected to your receiver (RX-E600) will be skipped.
To stop dubbing
Press &.
Note
• If DVD playback stops or completes when you are using the
DVD player as a recording source, the recording component
records 10 additional seconds of silence.
Record unit
Record unit
19