P80 : Day; P83 : Mode Of Backlighting; P84 : Illumination Duration; P85 : Lower Standard Display - STIEBEL ELTRON LWZ 130 Bedienung Und Installation

OPERATION
Settings
„P80 : Day „
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
„P83 : Mode of backlighting „
Options Effect
On Backlighting switched on
Off Backlighting switched off
Auto If no user action occurs within the time selected in the illumina-
tion duration parameter, the display backlighting switches off and
the standard display appears.
„P84 : Illumination duration „
If no user action occurs within the time selected in the illumination
duration parameter, the display backlighting switches off and the
standard display appears.
„P85 : Lower standard display „
Use this parameter to define what is displayed in the lower section
of the standard display. If the appliance detects a fault, the fault is
indicated in the lower section of the standard display.
4.5.2 Actual values
Display Description
„ „ I1 Passive cooling status
„ „ I2 Extract air temperature
„ „ I3 Relative humidity of extract air
„ „ I4 Filter service life
„ „ I5 Appliance software version
„ „ I6 Appliance software patch
„ „ I7 Serial number of the terminal device
„ „ I8 Programming unit software version
„ „ I70-79 Fault memory
Faults detected by the appliance are stored in actual values I70
to I79.
The latest fault is stored in I70; the oldest in I79. If no faults are
entered, dashes are shown. The latest fault is also shown in the
lower section of the standard display. Possible faults are listed for
qualified contractors in the "Troubleshooting" chapter.
www.stiebel-eltron.com
326794-40317-9268_LWZ_130_de_en.indb 31
4.5.3 Programs
„Pro „
The appliance offers the option to set 21 time programs. Switch
between the time programs using the Touch-Wheel. Press the "OK"
button to switch to setting a time program.
Time pro- x.1
gram x
Day or group of
days
… „ 1
… „ 2
… „ 3
… „
4
… „ 5
… „ 6
… „ 7
… „ 8
… „ 9
… „ 10
… „ 11
… „ 12
… „ 13
… „ 14
… „ 15
… „ 16
… „ 17
… „ 18
… „ 19
… „ 20
… „ 21
Setting a time program begins with selecting a day of the week or
a group of days. Press "OK". Set the day using the Touch-Wheel.
Unit
Confirm with the "OK" button.
°C Use the Touch-Wheel to switch to setting the fan stage. Press
% "OK". Set the fan stage in which the appliance runs when the
h time program takes effect using the Touch-Wheel. Confirm with
the "OK" button.
Note
You cannot switch on fan stage 3 with time programs.
Use the Touch-Wheel to switch to setting the start time. Press
"OK". Set the start time of the respective time program using the
Touch-Wheel. Confirm with the "OK" button.
Use the Touch-Wheel to switch to setting the stop time. Press
"OK". Set the stop time of the respective time program using the
Touch-Wheel. Confirm with the "OK" button.
To delete a time program, go to the menu item where the day or
group of days is selected for the respective time program. Turn the
Touch-Wheel anti-clockwise until the day disappears and dashes
appear in the lower section of the display.
Note
In the case of overlapping time programs, the program
with the highest number takes priority.
x.2 x.3 x.4
Fan stage Start time Stop time
LWZ 130 |
26.10.2017 18:38:15
31