Box Contents; Connection Diagram - Numark Mixdeck Express Bedienungsanleitung

BOX CONTENTS

MIXDECK EXPRESS
Power cable
USB cable
Software CD
Quickstart Guide
Safety & Warranty Information Booklet
SETUP
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
• Amplifiers
• Mixer
• Last, any input devices

CONNECTION DIAGRAM

MICROPHONE
HOUSE AMP TURNTABLE
COMPUTER
2
POWER
HEADPHONES