Led Indicators - Axis Q60 Serie Installation

LED Indicators

LED Color
Status Unlit
Amber
Amber/red
Red
Green
Connectors
For specifications and operating conditions, see page 18.
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording
with removable storage.
NOTICE
NOTICE NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To
unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• Resetting the product to factory default settings. See page 34.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic
DNS Service. For more information about these services, see the User Manual.
Power button - Press and hold the power button to temporarily power the product when the dome
cover is removed. The power button is also used with the control button to reset the camera to
factory default settings. See page 34.
Multi-connector - Terminal connector for connecting the supplied media converter switch, which
provides the following signals:
• DC Power
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
The supplied multi-connector cable is required in order to maintain the product's IP rating, see
Multi-Connector Cable, on page 17.
Indication
Connection and normal operation
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable
or lost.
Flashes red for firmware upgrade failure.
Shows steady green for 10 seconds for normal operation
after restart.
14
AXIS Q60 Series