Installation Steps; Package Contents; Recommended Tools; Optional Accessories - Axis Q60 Serie Installation

AXIS Q60 Series
Installation Guide
This Installation Guide provides instructions for installing AXIS Q6042-C, AXIS Q6044-C, or
AXIS Q6045-C PTZ Dome Network Camera on your network. For other aspects of using the product,
see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 18.
4. Install the hardware. See page 22.
5. Access the product. See page 32.

Package Contents

• Q6042-C/Q6044-C/Q6045-C PTZ Dome Network Camera
• Clear dome cover (premounted)
• AXIS T8605 Media converter switch
• Multi-connector cable (IP66), 7 m (23 ft)
• Installation and Management Software CD
• Printed materials
-
-
-

Recommended Tools

• Wire stripping tool
• Phillips screwdriver PH2 – if replacing the dome cover
• Torx screwdriver T20 – for cleaning the outer heat sink when necessary
• Torx screwdriver T30 – for installing the camera on a compatible bracket from AXIS T91A
Mounting Accessories and if replacing the dome cover

Optional Accessories

• Smoked dome cover
• Power supply
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
9