Axis Q60 Serie Installation Seite 30

1
Dip switch (4x)
17. Attach the cover to the media converter switch.
18. Switch on the mains supply.
19. Make sure the LED indicators on the media converter switch indicate the correct
conditions. For more information, see Media Converter Switch LED Indicators, on page 17.
1
Power LED indicator
2
Network LED indicator (4x) ETH 1/2/3/4
3
Camera LED indicator
Install the Network Camera
NOTICE NOTICE NOTICE
To comply with the IP66-rated design of the camera and maintain the IP66 protection, the
supplied multi-connector cable shall be used.
1. Install the selected bracket (sold separately) according to the instructions supplied with
the bracket. If drilling is required, make sure to use drill bits, screws, and plugs that are
appropriate for the material. See www.axis.com for information on available mounting
accessories.
1
1
2
3
30
AXIS Q60 Series