Axis Q60 Serie Installation Seite 25

AXIS Q60 Series
1
Screw (2x)
2
Cover
3 Media converter switch
4. Strip off 40 mm (1.57 in) of the multi-connector cable jacket.
5. Leave the braided shield intact, but cut off 30 mm (1.18 in) of the outer foil shield.
6. Fold back the leftover outer foil shield and twist the braided shield into a coil.
7. Cut off about 7–8 mm (0.27–0.32 in) of the Ethernet wire foil shields.
8. Strip off about 7–8 mm (0.27–0.32 in) of all the wire jackets.
1
2
3
25