Machine Information - Ferm CDM1129 Bersetzung Der Originalbetriebsanleitung

medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.

2. MACHINE INFORMATION

Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
Technical specifications
Model No
Charger
Input of charger
Output of charger
Rechargeable battery pack
Battery charging time
Chuck capacity
Torque settings
No load speed
Position 1:
Position 2:
Weight (incl. battery)
Sound pressure level L
PA
Sound power level L
WA
Hand-arm vibration a
h
(screwdriving without impact)
Hand-arm vibration a
h,D
(Drilling into metal)
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• U sing the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
• T he times when the tool is switched off or
when it is running but not actually doing the
job, may significantly reduce the exposure
level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. Machine
2. Battery
3. Battery unlock button
5. Charger
CDM1129
6. Charger LED indicator
CDA1101
7. Chuck
100-240V~ 50/60Hz
8. Gear selection switch
Max.0.4A
9. Direction switch
13.5V DC 1.3A
10. On / off switch
12 V Li-ion 1.3Ah 11. Torque adjustment ring
12. Work light
60 minutes
1.0 - 10 mm
17 + Drill mode
0-350 /min
0-1300 /min
1,0 kg
Removing the battery from the machine
66.57 dB(A), K=3dB(A)
Fig. B1 + B2
77.57 dB(A), K=3dB(A)
• P ush the battery unlock buttons (3) and pull
0.854 m/s K=1.5 m/s
2 2
2.069 m/s K=1.5 m/s
2 2
Inserting the battery into the machine
Fig. B1 + B2
• I nsert the battery (2) into the base of the
• P ush the battery further forward until it clicks
Charging the battery (with the charger)
Fig. C
• P lug the charger plug into an electrical outlet and
3. OPERATING
The battery must be charged before first
use.
the battery out of the machine like shown in
Fig. B1.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
machine as shown in Fig. B2.
into place.
wait for a while. The LED indicator on the charger
(6) will lighten up and show the charger status.
7