Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and free from oil and grease. 15. Disconnect tools. When not in use, before servicing and when changing accessories such as blades, bits and cutters. Ferm Ferm...
Seite 4
Remove the battery block. When the power tool is not being used, prior to maintenance and when changing tools such as the clamping chuck, and drill. • The tool is suitable for use as a screwdriver and drill. Any other application is specifically excluded. Ferm Ferm...
Put the net adapter in the socket. safety code. • The red charging lamp on the battery holder will REF NR DESCRIPTION FERM NR illuminate indicating the battery is being charged. Hold the appliance firmly and press the drill cutter KEYLESS CHUCK 406190 •...
Seite 6
Die Maschine braucht keine zusätzliche Schmierung. EN60335-1,EN60335-2-29, EN61000-3-2, • Charging the battery while it is still charged for say Please contact the Ferm service address if you have any EN61000-3-3 one-third of capacity, the so-called ‘memory effect’ questions regarding accessories and/or batteries.
Stecker aus der Steckdose zu ziehen. Schützen Sie die Anschlussleitung vor Hitze, Öl und scharfen Kanten. 12. Sichern Sie das Werkstück Benutzen Sie Spannvorrichtungen oder einen Schraubstock, um das Werkstück festzuhalten. Es ist damit sicherer gehalten als mit Ihrer Hand, und Sie haben Ferm Ferm...
6. Wenn Sie das Ladegerät nicht benutzen, muß der Anschließen eines Steckers eines losen Kabels an eine nur von einer Elektrofachkraft ausgeführt werden, indem Netzstecker aus der Kontaktdose gezogen sein. Steckdose ist gefährlich. Originalersatzteile verwendet werden. Ziehen Sie den Netzstecker nicht am Netzkabel. Ferm Ferm...