Machine Information - Ferm CDM1074 Originalbetriebsanleitung

CORDLESS SCREWDRIVER
CDM1074
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2 - 3.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Machine information

2. Safety instructions
3. Mounting accessories
4. Operation
5. Service & maintenance
1. MaChInE InFORMatIOn
Technical specifications
Voltage
Charger voltage
Charger frequency
Charging time
Chuck
Drill speeds
Max. torque
No load speed
Weight
Lpa (acoustic pressure)
Lwa (acoustic power)
Vibration
4
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
-
-
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Cordless screwdriver
1 Desktop holder with bit storage
1 Charger
1 Magnetic bit holder
16 Bits
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport
Product information
Fig. 1 + 2
1. Bit holder
2. Locking sleeve
3. Torque setting ring
4. Magnet
5. Desktop holder
6. Charger connection
7,2 V
7. Worklight
Lithium-Ion
8. On/Off switch
230 V
9. Direction switch
50 Hz
10. Battery status switch
3 - 5 hours
11. LED work light switch
1/4" hexagonal
12. Battery status indication
1
10 Nm
0 - 500/min
0.93 kg
68.5 + 3 dB(A)
79.5 + 3 dB(A)
1.92 + 1.5 m/s
2
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level