Using The Heater - RUSTA 906512350101 Gebrauchsanweisung

USING THE HEATER

POWER AND HEAT SETTINGS
THERMOSTAT
OPERATION
• Plug the heater into a suitable power outlet [observing all the instruction regarding
positioning and switch on.
TO USE THE MACHINE FOR HEATING
• Turn the control dial to "I" for low heat and "II" for full heat.
• Set the level of heat by turning the thermostat dial gradually clockwise for the lowest heat
and fully clockwise for maximum.
• The thermostat will turn the machine off when the selected room heating is achieved, and
when the temperature drops it will turn on again automatically.
• For maximum heat output use "II" with the thermostat turned fully clockwise.
• To distribute heat evenly around a room, Turn the control dial to "
" " for full heat.
SAFETY TIP-OVER SWITCH
The appliance is fitted with a tip-over switch. When you use the appliance in an upright
position on a flat and stable surface, the tip-over switch will be on. In the event the heater is
knocked over, the heater will stop functioning automatically.
HIGH heat setting (2000W) with oscillation
HIGH heat setting (2000W)
O OFF
LOW heat setting (1000W)
LOW heat setting (1000W) with oscillation
Turn clockwise to increase the heat output.
" for low heat or
7