Specifications - Makita BGD800 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Red part
1-3. Battery cartridge
2-1. Slide switch
3-1. Indication lamp

SPECIFICATIONS

Max. wheel point diameter
No load speed (
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BGD800
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BGD801
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
4-1. Wrench 13
4-2. Wheel point
4-3. Collet nut
4-4. Wrench 13
7-1. Limit mark
Model
Collet capacity
n
) / Rated speed (n)
o
Overall length
Net weight
Rated voltage
) : 72 dB(A)
pA
2
) : 6.5 m/s
h,SG
2
2
) : 2.5 m/s or less
h,SG
2
BGD800
402 mm
2.0 kg
ENE050-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Die Grinder
Model No./ Type: BGD800, BGD801
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
ENG901-1
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
8-1. Holder cap cover
8-2. Screwdriver
9-1. Brush holder cap
9-2. Screwdriver
BGD801
6 mm or 6.35 mm (1/4")
38 mm
-1
25,000(min )
307 mm
D.C. 18 V
Corporation as the
1.7 kg
ENH101-15
responsible