Megasat HD 5 Combo Bedienungsanleitung Seite 31

3. Main Menu
3.2.6 System
In this menu you can set the antenna supply. Select between 5 V, 12 V or OFF.
Select the supply voltage according to your active antenna.
No supply voltage is required for passive antennas.
22
ENGLISH
3. Main Menu
3.2.7 Constellation
Analyze via channel number / frequency
If you select „Analyze by channel number", you can manually select a channel (frequen-
cy). Press OK to start the constellation analysis.
Analyze via channels
If you select „Analyze by Program", you can select the stored programs using the
buttons. The constellation analysis is updated automatically..
Note:
Press the F1 key to get more measured values.
ENGLISH
t u
23