Attaching The Lashing Strap - Powerfix Profi HG01827A Bedienungs- Und Sicherheitshinweise

sharp edges of the load on which it is used. Regular visual inspection
before and after each use is recommended.
10. Only legibly marked and labelled lashing straps may be used.
11. Lashing straps must not be overloaded: The maximum hand force of
250 N (25 daN on the label; 1 daN ≈ 1 kg) may be applied with
only one hand. Mechanical aids such as bars or levers etc. may not
be used unless they are part of the tensioning device.
12. Lashing straps may not be used when knotted.
13. Damage to labels must be prevented by keeping them away from
sharp edges of the load and, if possible, from the load.
14. Webbing must be protected against friction, abrasion and damage
from loads with sharp edges by using protective sleeves and / or
corner protectors.
˜ Use
˜ Attaching the lashing strap
The selected lashing equipment must be strong and long enough
for the intended purpose and have the correct length for the type of
lashing. Responsible users plan cargo security in advance: they plan
the attachment and removal of the lashing devices before the start of
the journey. With longer trips, partial unloading must be considered.
GB 15