Hitachi HC-A64BNP Technische Mitteilung Seite 10

TECHNICAL
BULLETIN
2. Date Arrangement
() HC-A64BNP Shipment
(2) HC-A64BNP Installation
(3) HC-A64BNP Connection
(4) Air Conditioner Test Run
(*) Control and Monitoring Test Run for Air Conditioner by BACnet
®
3. BACnet System Test Run & Adjustment
Confirm to ensure that it is possible for the air conditioners to monitor and control by the BACnet
simulator as the BACnet
®
<BACnet System Test Run Procedure>
. Connect the BACnet
2. Check to ensure that the air conditioners could be operated according to the control command, RUN/
STOP and so on, by the BACnet
3. Check to ensure that the operation of the indoor unit by the remote control switch is indicated on the
®
BACnet simulator screen correctly.
4. In the case where the alarm signal is included in the monitoring items of BMS, generate an alarm of the
indoor unit, and check to ensure that the alarm signal is indicated on the BACnet
®
(*2) The BACnet simulator is to operate and monitor the air conditioners by transmitting and receiving the
data from the BACnet
Hitachi Appliances, Inc.
HITACHI
Launching of HC-A64BNP BACnet
®
adaptor is disconnected from the BACnet
Connect to
PC for
R
BACnet
Simulator.
Indoor Unit
®
transmission line (LAN cable) of the BACnet
®
simulator.
®
instead of BMS.
Shimizu Air Conditioning
Works,
Distributed to √ Areas:
All Areas
Europe
U.S.A.
Others (Oceania, South America)
®
Adaptor
®
(5) BACnet System
Test Run (*)
(6) BMS Connection Check
(7) Delivery
®
Simulator
®
line.
BMS
BACnet
Disconnect Line
R
to BACnet
R
BACnet Adaptor
H-LINK
Indoor Unit Indoor Unit
®
adaptor to the BACnet
No.
the Middle East
Southeast Asia
√
Africa
DATE:
PAGE: 0/0
.
®
simulator (*2).
®
simulator.
APN-A8002-EN
√
√
04-2008
®