Functional Description; General Power Tool Safety Warnings; Declaration Of Conformity; Electrical Safety - WOLFF PS230 Originalbetriebsanleitung

Functional description

Please refer to the graphics on pages 2 while you read
the operating instructions.
Restriction of use
The screed grooving machine is designed exclusively for
sawing of glued down parquet and sports fl oors or cutting
grooves in screed without the use of water and in combi-
nation with a Dust Category M vacuum cleaner.
When the machine is used in another way, it shall be
regarded as unfi t for the purpose.
Wolff GmbH & Co.KG shall not accept any liability for
damage resulting from non-intended use.

Declaration of Conformity

We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents:
DIN EN 1037, EN ISO 12100, DIN EN 62841-1,
DIN EN 62841-2-5, DIN EN 62841-2-22,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the:
2006/42/EC, 2014/30/EU, 2014/35/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
19.01.2018 i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply.........................................................230 V AC
Frequency ..................................................................50 Hz
Power consumption..................................................2600 W
Maximum speed................................................6.500 r.p.m.
Weight..........................................................................29 kg
Max. grooving depth.............................................0 - 60 mm
Cutting blade........................................................ Ø230 mm
Includes:
1 Sawing machine PS230
1 Protective goggles
1 Hearing protection
1 Two pin wrench
1 HM sawing blade
1 Adapter vacuum cleaner
1 Operating instructions
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
2.0 Safety Warnings

2.1 General Power Tool Safety Warnings

Warning
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
2.2.1 Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mos-pheres, such as in the presence of fl ammable
liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
Distractions can cause you to lose control.

2.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never mo-
dify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige
rators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
www.wolff -tools.de
Read all safety warnings and all instruc-
tions.
EN
15