Initial Calibration; Operation; Turning Scale On/Off; Weighing - OHAUS Valor 1000 Serie Bedienungsanleitung

EN-6

2.4 Initial Calibration

When the scale is operated for the first time, a Span calibration is recommended to
ensure accurate weighing results. Before performing the calibration, be sure to have
the appropriate calibration weight. You can also Contact an OHAUS servicing-scale
dealer for more information.
Refer to section 4.1 for Span calibration procedures.
Required Span Calibration Mass (sold separately)
Max
2000 g; 3000 g
5000 g; 6000 g
10000 g; 15000 g
20000 g; 30000 g

3. OPERATION

3.1 Turning Scale On/Off

Press On/Off to turn the scale on. The scale will find and set the zero weight point
automatically after it displays the software version.
In weighing mode, short press On/Off for more than 3 seconds to turn the scale off.

3.2 Weighing

Once the scale has a stable zero weight and the tare weight of any packaging or
container has been captured, place the product being weighed on the platform --
the display will show the weight of the product in the selected unit of measure.
Mass
2 kg / 6 lb
5 kg / 15 lb
10 kg / 30 lb
20 kg / 60 lb
TM
Valor 1000 Series