Werbung
K40945 - K40946 - K40955 - K40956
I n i t i a l m o n i t o r - s m a r t p h o n e
configuration
Installation notes:
-
We recommend you install the monitor near the router in
order to have a strong enough Wi-Fi signal
-
We advise against installing the monitor near large metallic
objects or near devices which could generate electromagnetic
fields
Once the system has been connected, the devices can be
enabled.
Switching on the EVO Wi-Fi monitor may take approximately 40s.
The monitor has a label at the back featuring the following data:
Device QR code
Default Password: initial password (password to be kept private
and confidential)
AP name: device name in AP mode
UID: Unique monitor ID
MAC: MAC Wi-Fi address
Once you have selected your chosen language, the monitor
shows the following screen:
Note that the icons relating to the Wi-Fi signal and to the connec-
tion to the cloud indicate there is no communication.
Select the Wi-Fi icon to enter the Wi-Fi and remote operation
functions configuration page.
a - Enabling/disabling the Wi-Fi module
b - Forward call setting from outdoor station to App:
- OFF: forwarding disabled
0s - 25s: time you wish to pass between the call from
the outdoor station and the call forwarding to your
smartphone.
- 0s: the call is forwarded immediately
- 5s, 10s,.. the call from the outdoor station is
forwarded to the App after 5s, 10s, ... respectively.
c - Area with an indication of the name of the Wi-Fi network
(SSID) and an indication of the Wi-Fi signal strength
d - QR code which unequivocally identifies the Wi-Fi
monitor
e - alphanumerical UID which unequivocally identifies the
Wi-Fi monitor
f - Function to remove every app-video entryphone
connection.
After using this function, reconfigure the app-video
entryphone connection, removing the device previously
connected from the VIEW Door app and reconnecting
it immediately thereafter using the "Device connected
to Network" option, proceeding solely with the initial
configuration using the QR code.
g - Function to reset the Wi-Fi configuration.
With this function, the router-video entryphone connection
and all app-video entryphone connections will be reset.
Following the Wi-Fi reset, the video entryphone will go
back to the initial configuration status, in other words it
will go into Access Point mode.
EN
a
b
c
d
e
f
g
31
Werbung
