Energy Saving Advice
Do not install the appliance close to sources of heat, such as a cooker, dishwasher or radiator.
•
Locate the appliance in a cool well-ventilated room and make sure that the air vents are clear.
•
Try to avoid keeping the doors open for a long time, warm air will enter the cabinet and may
•
cause a build-up of ice as well as affecting the energy consumption. Ensure there are no
obstructions preventing the doors from closing properly.
Ensure that the door seals are clean and there are no tears or splits.
•
Do not overload the appliance ; the cooling air that circulates to keep the appliance cold gets
•
blocked and pockets of warm air form.
III. MAINTENANCE & CLEANING
Disconnect the appliance from the power supply before
cleaning.
Internal Cleaning
Do not pour water over the appliance.
•
The cavity should be cleaned periodically using a solution
•
of bicarbonate of soda and lukewarm water (5ml to 0.5
litre of water)
Clean the accessories separately with soap and water. Do
•
not put them in the dishwasher.
Do not use abrasive products, detergents or soaps.
•
After washing, rinse with clean water and dry carefully.
•
When you have finished cleaning reconnect the plug with
•
dry hands .
External Cleaning
Wash the outer cabinet with warm soapy water. Do NOT
•
use abrasive products.
There are sharp edges on the underside of the product so
•
care should be taken when cleaning.
Once or twice a year dust the rear of the appliance and
•
the compressor at the back of the appliance, with a brush
or vacuum cleaner, as an accumulation of dust will affect