Index Search - Yamaha CDX-497 Bedienungsanleitung

To stop program playback
Press . The first programmed track number is displayed.
To resume program play, press
from the first programmed track number.
To clear program data
There are several methods, as described below.
● Press
or CLEAR while the unit is stopped.
● Open the disc tray.
● Switch off the power.
If the disc includes index numbers, playback can be started from any desired index number.
1
Press INDEX.
2
Press a numeric button to select the desired index
number.
6
. The playback starts

INDEX SEARCH

INDEX
To check program data
1. If during program play, press
2. Press PROGRAM.
3. Each time is pressed, the track numbers and
sequential order of the programmed tracks can be
checked one after another. The display of the track
number can be returned (sequentially in reverse order)
by pressing .
To correct program data
1. Follow the procedure described in "To check program
data".
2. Display the track number to be corrected by pressing
/ .
3. Press a numeric button to select a desired track to
replace the one displayed. The previously programmed
track is cleared from the memory, and the new one is
programmed.
4. Press PROGRAM to complete the correction. To start
program play immediately after making the correction,
press instead of pressing PROGRAM.
To cancel the index search function
Press INDEX.
Notes
● Not all discs have index numbers. In addition, among those
discs which have index numbers, not all discs necessarily have
more than one index number.
● The index system is a method for sub-dividing tracks into
smaller divisions for easier location of those parts. The liner
notes contained in the disc case usually tell that such index
numbers are included with the
● For some discs, playback may starts slightly prior to the actual
designated index point.
● If the disc has no encoded index points, playback starts from
the beginning of the selected track.
● The index number can be designated only while "INDEX" is
illuminated.
.
mark.
15
En