Index Search - Yamaha cdx 396 Bedienungsanleitung

To stop program play
Press . The first programmed track number will be
displayed.
To resume play, press . Play will begin from the
beginning of the program.
To clear program data
There are several methods, as described below.
● Press
or CLEAR while the unit is stopped.
● Open the disc tray.
● Switch off the power.
If the disc includes index numbers, play can be started from any desired index number.
1
Press a numeric button to select a track which has
index numbers.
2
Press INDEX.
INDEX
3
Press a numeric button to select the desired index
number.

INDEX SEARCH

5
CDX-596
5 6 7 8 9 10
11 12
CDX-496, CDX-396
INDEX
6
To check program data
1. If during program play, press
2. Press PROG.
3. Each time (SKIP/SEARCH
track numbers and sequential order of the programmed
tracks can be checked one after another. The display of
the track number can be returned (sequentially in
reverse order) by pressing
To correct program data
1. Follow the procedure described in "To check program
data".
2. Display the track number to be corrected by pressing
/ ( SKIP/SEARCH
3. Press a numeric button to select a desired track to
replace the one displayed. The previously programmed
track will be cleared from the memory, and the new one
will be programmed.
4. Press PROG to complete the correction. To begin play
immediately after making the correction, press
instead of pressing PROG.
To cancel the index search function
Press INDEX.
Notes
● Not all discs have index numbers. In addition, among those
discs which have index numbers, not all discs necessarily have
more than one index number.
● The index system is a method for sub-dividing tracks into
smaller divisions for easier location of those parts. The liner
notes contained in the disc case usually tell that such index
numbers are included with the
● If an index number is selected that is higher than any index
number on that disc, play will start from the last index point on
the disc.
● For some discs, play may begin slightly prior to the actual
designated index point.
● If the disc has no encoded index points, play will begin from
the beginning of the selected track.
● The index number can be designated only while "INDEX" is
illuminated.
.
) is pressed, the
( SKIP/SEARCH).
).
mark.
15
E-