Rear Panel; Front Panel Display - Yamaha CD-N301 Bedienungsanleitung

CONTROLS AND FUNCTIONS

Rear panel

1
1 ANALOG OUT terminal (☞ P.9)
Outputs L/R analog audio signals. Connect to your amplifier
or audio system using the RCA stereo cable (supplied).
2 DIGITAL OUT terminal (COAXIAL) (☞ P.9)
Outputs digital audio signals. Connect to your amplifier or
audio system using a coaxial digital audio cable
(commercially available).
3 DIGITAL OUT terminal (OPTICAL) (☞ P.9)
Outputs digital audio signals. Connect to your amplifier or
audio system using an optical cable (commercially
available).

Front panel display

1 Information display
Displays various information such as the song title.
y
For more information on the messages displayed, see "Front
panel display messages" (☞ P.31).
2 PROGRAM indicator
Lights up when the unit is in program playback mode
(☞ P.16).
8
En
2 3 4 5
1
4 NETWORK terminal (☞ P.10)
Connects to a network using a network cable (commercially
available).
5 DC OUT terminal
Supplies power to the Yamaha AV accessories from this
terminal. When using this, set "Accessory" in "System
Config" from the setup menu, to "On" (☞ P.23). For details,
refer to the owner's manual supplied with the accessory.
6 AC IN socket (☞ P.9)
Connects to an AC outlet using the power cable (supplied).
3 REPEAT/SHUFFLE indicator (☞ P.14, 18)
Lights up when the unit is in repeat or shuffle mode.
Repeat playback
: REPEAT ALL
: REPEAT ONE
: REPEAT FOLDER
: A-B REPEAT
Shuffle playback
: SHUFFLE ALL
: SHUFFLE FOLDER
6
2 3
1 F P
A B