Operation; Cleaning - Silvercrest SAS 7.4 LI C1 Bedienungsanleitung

Operation

CAUTION!
► The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTICES
► Make certain that the dust filter
appliance.
► When vacuuming liquid, do not exceed the MAX marking in dirt container
1) Remove the handheld vacuum cleaner from the wall bracket
not using the wall bracket
2) If required, place the appropriate nozzle in the suction opening.
The crevice tool
accessory storage in the handle.
–
the crevice nozzle
–
the wet suction nozzle
NOTE
► After you have vacuumed up liquids, immediately clean the dirt container
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag
3) To switch the appliance on, slide the on/off switch
indicator lamp
4) When you have finished using the appliance, slide the on/off switch
the rear.
NOTE
► Place the handheld vacuum cleaner in the wall bracket
charging process once the vacuum power has become noticeably weaker
and the charge indicator lamp

Cleaning

To achieve the best results, empty the dirt container
after every use.
CAUTION! MATERIAL DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
SAS 7.4 LI C1
remove the barrel plug
and the wet suction nozzle
, to clean narrow and difficult to reach locations.
is completely dry before using the appliance again.
lights up green.
is always inserted before using the
are kept in the space-saving
to vacuum up liquids.
flashes green.
and clean the dust filter
.
or, if you are
from the socket.
.
forwards. The charge
to
and start the
GB │ CY │ 9 ■