Nickel-Metal Hydride Batteries (Nimh); Lead Batteries (Pb); Lithium Batteries (Lipo, Liio, Life); General Information - Multiplex B6 EQ-BID Bedienungsanleitung

High current batteries, 2-3C, up to 5C under exteme circumstances. Pay attention to the
maximum charging current specified by the battery manufacturer. Also check that the plug
connection and the charging leads are suitable for the selected charging current.

14.2 NICKEL-METAL HYDRIDE BATTERIES (NIMH)

We recommend the following charging rates for NiMH batteries:
High energy batteries, 0.5...1C, pay attention to the information provided by the battery
manufacturer.
High current batteries, normally 1C, some types of batteries can be charged at 1.5...2C.
Pay attention to the maximum charging current specified by the battery manufacturer.
14.3

LEAD BATTERIES (PB)

ventilation when charging. Overloading creates „detonating gas", a mixture of water
and oxygen .
Risk of explosion.
children.
and are therefore less dangerous.
mely dangerous due to the caustic sulphuric acid and the rapid formation of gas under
overload conditions.
inadvertently come in contact with the skin or eyes, flush immediately with ample water
and consult a doctor. Never put cells or batteries in your mouth - risk of poisoning.
manufacturer.

14.4 LITHIUM BATTERIES (LIPO, LIIO, LIFE)

GENERAL INFORMATION

Different types of lithium batteries are available:
1. Lithium-ion batteries with liquid electrolyte and 3.6 Volt nominal voltage - the first gene-
ration of lithium batteries, scarcely used in model construction applications.
2. Lithium-ion batteries (LiIo) with liquid electrolyte and 3.6 Volt nominal voltage - the
second generation of lithium batteries, with metal casing .
3. Lithium-ion-polymer batteries (LiPo) with gel electrolyte and 3.7 Volt nominal voltage
- the current generation of lithium batteries, also known as LiPo. On account of the gel
Operating Instructions
Power Peak ® B6 EQ-BID
27 59
Therefore, ensure adequate
# 30 8561
-