Material Damage; Inserting Batteries; Massaging; Cleaning - Silvercrest SRM 3 A1 Bedienungsanleitung

Gra88620 Rückenmassagegerät LB4 Seite 5 Mittwoch, 16. Januar 2013 2:03 14
• Do not use different battery types or a
mixture of new and old batteries at the
same time.
• Do not short-circuit the batteries.
• Remove the batteries if the product is not
going to be used for a long time.
Leaking batteries may damage the
product.
1. Open the zip 3.
Note: The zip can only be opened
around 10 cm wide.
2. Insert 2 batteries (size AA/LR6).
1. Use the securing straps to secure the
back massage cushion 2 to the backrest
of a suitable chair .
If necessary, clean the device with a soft
brush.
You can also use a soft, damp cloth.
SRM 3 A1

4.6 Material damage

Caution! To prevent material damage,
please observe the following:
• Do not expose the device to moisture
and only use in dry rooms.
• Never immerse the device in water.
• Never use the device where it could fall
into water, e.g. in a bathtub.
• Keep the device away from sources of
heat, e.g. a radiator.

5. Inserting batteries

When inserting the batteries, pay
attention
labelling on the bottom of the battery
compartment).
3. Close the zip 3.

6. Massaging

2. Switch the device on and off using the
ON/OFF button 1.

7. Cleaning

to correct polarity (see
5