Built-In Unit Opening Dimensions - Napoleon BIPRO 500 Bedienungsanleitung

BUILT-IN UNIT OPENING DIMENSIONS

MODEL
BIPRO500
SIDE BuRNER
WARNING!
!
materials when installed with zero clearance liner Part No. BI-3323-ZCL and must be installed and
serviced by a qualified installer to local codes.
WARNING!
(certified class A to EN 13501-1 standard) when finishing the appliance (e.g. steel studs, cement board,
ceramic tile, marble, paint, etcetera). Do not use wood or drywall.
!
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
RECOMMENDED
2
MINIMUM 65 cm IN OF
VENTILATION REQUIRED
ON EACH END OF
CABINET
N415-0541CE-GB-DE JuNE 04.19
N415-0541CE-GB-DE.indd 19
OPENING DIMENSIONS
W D
781mm 524mm 225mm
324mm 419mm 114mm
This grill is designed for installation in a built-in enclosure constructed of combustible
If not installing with the Zero Clearance Liner, use only non-combustible materials
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
4"
864mm
!
WARNING!
CABINET FRAME, CABINET AND
COUNTER TOP MUST BE MADE FROM NON-
COMBUSTIBLE MATERIAL WHEN NOT INSTALLED WITH
THE ZERO CLEARANCE LINER PART NO. BI-3323-ZCL
NOTES
H
WITHOuT ZERO CLEARANCE LINER
OPENING OF AT LEAST 32cm
AIR FOR SIDE BuRNER.
BUILT-IN SIDEBURNER
H
2
MuST BE PROVIDED FOR COMBuSTION
www.napoleon.com
19
EN
6/4/2019 10:29:27 AM