Assembly Of Mechanism Deck; Housing; Arm (Suction) - Sony XR-CA600 Betriebsanleitung

XR-CA600/CA600V/CA600X
Note: Follow the assembly procedure in the numerical order given.
3-1.

HOUSING

2 Install the hanger onto
4 Fit claw on B part.
3 Put the housing
under A part.
housing
A part
3-2.

ARM (SUCTION)

projection
10
SECTION 3

ASSEMBLY OF MECHANISM DECK

5 Fit projection on C part.
two claws of the housing.
C part
B part
7 Hold the hanger by bending the claw.
1 Install the catch to the hanger.
hanger
6 Fit projection on D part.
8 Hold the hanger by
bending the claw.
2 Move the arm (suction) in the arrow
direction and fit on projection.
1 Fit the arm (suction) on the shaft.
D part