Cooking Zones + Temperature; Controller - hanseatic 5022IE2.323eEHiTaDJW Gebrauchsanleitung

Page EN-12 The hob
Pot recognition is installed in the cooking
zones. Pot recognition ensures that the
cooking zone is switched on only when
– cookware with a magnetic bottom is actu-
ally placed on the cooking zone.
– the size of the cookware fits the cooking
zone dimensions. If the cookware is too
small, the cooking zone cannot be switched
on.
– the cookware has been placed in the mid-
dle of the cooking zone.
You should not use:
– Indented or battered pans.
– Pans with a rough base.
– Pans with a curved base.
– Coated cookware that is scratched inside.

Cooking zones + temperature

controller

(7) (8)
(2)
(1)
Cooking zone
(1) Front left
(2) Rear left
(3) Rear right
(4) Front right
(11) (12)
(3)
(4)
Controller
(7)
(8)
(11)
(12)
NOTICE
Risk of damage!
Turn the temperature controllers clock-
wise to turn them on, anticlockwise to
turn them off.
(7) (8)
(11)
The hob has four cooking zones. Each
cooking zone has its own temperature con-
troller.
• Turn the temperature controller clockwise
to the desired heating level (1–9) as re-
quired.
• Turn the temperature controller anticlock-
wise to '0' in order to switch it off.
Further information on the topics
– Proper heating level can be found in Sec-
tion „Tips for saving energy" on page EN-15.
– For 'A', see „Automatic reduction in heating
level A" on page EN-13.
– For 'P', see „Booster function P" on page
EN-14.