JVC KW-AVX700 Bedienungsanleitung Seite 49

Menu items
Subwoofer
High Pass Filter
Crossover
Amplifi er Gain
Rear Speaker*
Mono
PTy Standby
DX / Local
SSM
Title Entry
Off /Intro/Repeat/Random Only for disc playback, SD playback, and iPod/D. player.
D.(Dynamic) Range Control Only for DAB. (Off , 1, 2, 3),
Announce Standby
OSD
Auto MEMORY
List
Dual Zone
* 13 This subwoofer level setting take effects only when surround is deactivated (
* Functions only when Dual Zone is activated.
14
* 15 Items listed under <Mode> vary among the playback sources.
Selectable settings, [reference page]
Adjust the settings below in the submenu:
• Phase: Subwoofer phase. Select either "Normal" or
"Reverse," which reproduces a better sound.
• Level*
Through: Select when the subwoofer is not connected.
On:
Adjust the crossover frequency between the front/rear
speakers and the subwoofer.
80Hz, 120Hz, 150Hz
You can change the maximum volume level of this receiver.
Off :
Low Power:
High Power:
You can activate/deactivate the rear speakers.
14
Off, On
Only for FM. (Off, On),
Only for FM/DAB. (Off , News),
• When you activate PTY Standby Reception, you can change
the PTY code for PTY Standby Reception.
Only for FM. (DX , Local),
Only for FM.
Only for conventional CDs, TV stations, AV-IN, and EXT-IN.
☞
[18, 32, 38]
Only for DAB. (Off , TransportNews),
Only for TV. (Off , Channel, Channel+Station),
Only for TV.
The accessible lists differ depending on the sources.
Off, On/Surround Off, On/Surround On,
13 : Subwoofer output level. Level: –6 to +8; Initial 0
Select when the subwoofer is connected.
Deactivates the built-in amplifier.
VOL 00 to 30 (Select this if the maximum
power of the speakers is less than 50 W)
VOL 00 to 50
☞
[10]
☞
[11]
☞
[11]
☞
☞
[36]
49
☞
[13, 34]
[33]
☞
[35]
☞
[37]
☞
[26]
☞
also page 46).
SETTINGS
☞
[41]