JVC KW-AVX700 Bedienungsanleitung Seite 47

Menu items
IF Band Width
DAB AF * 7
TV Channel Area *
AV Input
External Input
* Appears only when DAB tuner is connected.
7
* Appears only when TV tuner unit KV-C1001 is connected.
8
* Reverse lamp wire connection is required. See Installation/Connection Manual (separate volume).
9
The rear view through the camera appears on the monitor in "Full" aspect ratio (regardless of the
aspect ratio setting) when you shift the gear to the reverse (R) position.
* 10 The name of the component detected through the CD changer jack is shown.
Selectable settings, [reference page]
Auto: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may
be lost.)
Wide: Subject to the interference from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
☞
Off, On,
8
When connecting the TV tuner unit.
CCIR:
ITALY:
INDONESIA:
You can determine the use of LINE IN and VIDEO IN plugs.
Off :
Audio&Video:
Audio:
Camera *
Camera Reverse *
When connecting an external component to the CD changer
jack on the rear.
Changer/iPod/D. player *
External Input: Any other than the above.
• For connecting the DAB tuner, this setting is not required.
It is automatically detected.
[35]
Normally select this.
Select when in Italy.
Select when in Indonesia.
Select when no component is connected
("AV-IN" is skipped while selecting the
source).
Select when connecting an AV
component such as a VCR.
Select when connecting an audio
component such as an MD player.
9
: Select when connecting the rear view
camera.
9
: The mirror image of the rear view is
displayed on the monitor. (The monitor
on the receiver only; the normal rear view
appears on the external monitor.)
10
: CD changer, iPod, or D. player
☞
[31, 38]
47
☞
[39]
SETTINGS