JVC KD-DV6201 Bedienungsanleitung Seite 30

Indication
TEL
Telephone muting
SCROLL* 4
WOOFER
Subwoofer cutoff
frequency
HPF
High pass filter
EXT IN* 5
External input
TAG DISP
Tag display
REAR SPK* 6
Rear speaker output
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
filter
1
* Only for RDS FM preset stations.
2
* Depending on the "AMP GAIN" setting.
3
* Displayed only when DAB tuner is connected.
* 4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 5 Displayed only when one of the following sources is selected—FM, AM, DISC, USB, or LINE IN.
* 6 Displayed only when Dual Zone is activated (see page 26).
Item
• MUTING 1/ : Select either one which mutes the playback sounds while using
MUTING 2 a cellular phone.
• OFF [Initial] : Cancels.
• ONCE [Initial] : Scrolls the track information once.
• AUTO : Repeats scrolling (5-second intervals).
• OFF : Cancels. (Holding DISP can scroll the display regardless of the
setting.)
• LOW : Frequencies lower than 85 Hz are sent to the subwoofer.
• MID [Initial] : Frequencies lower than 125 Hz are sent to the subwoofer.
• HIGH : Frequencies lower than 165 Hz are sent to the subwoofer.
• HPF ON : The cut-off frequency is chosen automatically according to the
WOOFER setting (LOW/MID/HIGH) so that you can enjoy the
bass sound purely from the subwoofer if it is connected.
• HPF OFF [Initial] : Cancels.
• CHANGER [Initial] : To use a JVC CD changer, [22], or an Apple iPod/a JVC D. player,
[24].
• EXT IN : To use any other external component than the above, [25].
• TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks.
• TAG OFF : Cancels.
• ON [Initial] : Select this to turn on the rear speaker output.
• OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select if the maximum power of each speaker
is less than 50 W to prevent the speaker from being damaged.)
• HIGH PWR : VOL 00 – VOL 50
[Initial]
• AUTO [Initial] : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• WIDE : Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Setting, [reference page]
30