Activating/Deactivating Ta/Pty Standby Reception; Tracing The Same Programme-Network-Tracking Reception; Automatic Station Selection-Programme Search - JVC KD-DV6201 Bedienungsanleitung

Activating/deactivating TA/PTY Standby Reception

TA Standby Reception
Press to activate.
The unit temporarily will switch
to Traffic Announcement (TA), if
available, from any source other than
AM.
The volume changes to the preset
TA volume level if the current level
is lower than the preset level (see
page 29).
Not yet activated. Tune in to another
station providing the RDS signals.
Press to deactivate.
Tracing the same programme—Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this unit automatically
tunes in to another FM RDS station of the
same network, possibly broadcasting the same
programme with stronger signals (see the
illustration on the right).
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see "AF-REG" on page 29.
• When the DAB tuner is connected, refer to
"Tracing the same programme—Alternative
Frequency Reception" on page 23.
Automatic station selection—Programme Search
Usually when you press the number buttons, the preset station is tuned in.
If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using
the AF data, tunes in to another frequency broadcasting the same programme as the original preset
station is broadcasting.
• The unit takes some time to tune in to another station using programme search.
• See also page 29.
Indicator PTY Standby Reception
See page 29.
Lights up The unit temporarily will switch to
your favorite PTY programme from
any source other than AM.
Flashes Not yet activated. Tune in to
another station providing the RDS
signals.
Goes off Select "OFF" for the PTY code (see
page 29).
Programme A broadcasting on different frequency areas
(01 – 05)
12
Indicator
Lights up
Flashes
Goes off