JVC KD-DV5301 Bedienungsanleitung Seite 38

Symptom
• Disc cannot be played back.
• Noise is generated.
• Longer readout time is required.
• Tracks cannot play back as you have intended
them to play.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
• "noSIGNAL" appears on the display.
• "RESET 8" appears on the display.
• The DAB tuner does not work at all.
• "ANTENNA" appears on the display.
38
Remedy/Cause
• Change the disc.
• Record the tracks using a compliant application in the
appropriate discs (see page 4).
• Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav>
to the file names.
Skip to another track or change the disc.
Readout time varies due to the complexity of the folder/
file configuration. Do not use too many hierarchies and
folders.
Playback order is determined when files are recorded.
• Record the audio track using MP3 or Dolby Digital as the
audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
Insert a disc that contains tracks of appropriate formats.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit (see page 2).
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly and reset
the unit (see page 2).
Reconnect this unit and the DAB tuner correctly. Then,
reset the unit (see page 2).
Check the cords and connections.