Using The Front Panel - AEG CSFMP300 Bedienungsanleitung

USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button, then
the front panel will slide down.
OPEN
2. To remove the front panel, lift it up at
a little angle from horizontal position,
then first pull out the right side and
then pull out the left side.
The left side
Front Panel
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Protective Case
Front Panel
To Install the Front Panel
1. To install the front panel, first insert
the left side into proper position then
insert the right side into place.
2. When the two sides fixed into place,
3. Note that if the front panel fails to
The right side
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display
3. Do not touch the contacts on the
4. If any dirt or foreign substances
5. Do not expose the front panel to high
6. Keep away any volatile agents (e.g.
7. Do not attempt to disassemble the
6
The left side
The right side
Front Panel
push the front panel into main unit.
lock in position properly, pressing
control button may not function and
the display may be missing some
segments. Press the button and
then reinstall the front panel again.
or control buttons when detaching
or reinstalling the front panel.
front panel or on the main unit body.
It may result in poor electrical contact.
adhered on the contacts, they can
be removed with a clean and dry cloth.
temperatures or direct sunlight in
anywhere.
benzene, thinner, or insecticides)
from touching the surface of the front
panel
front panel.