Flashing Led; Reset Function; Radio Operation; Switching To Radio Mode - AEG CSFMP300 Bedienungsanleitung

OPERATION
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on te display(8)

FLASHING LED

If the front panel does not install in the
main unit, the LED (24) will be flashing.

RESET FUNCTION

RESET button (25) must be activated
with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (25), the
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the front panel.

RADIO OPERATION

SWITCHING TO RADIO MODE

Press MOD button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.

SELECTING THE FREQUENCY BAND

At radio mode, press BND/LOU
button (13) shortly to select the
desired band.
The reception band will change in the
following order:
FM1 FM2 FM3

SELECTING STATION

Press MANU/SKIP
or button MANU/SKIP
shortly to activate automatic seek
function. Press for several seconds
until "MANUAL" appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds,
they will return to seek tuning mode
and "AUTO" appears on the display.
AUTOMATIC MEMORY STORING &

PROGRAM SCANNING

- Automatic memory storing

Press AS/PS button (18) for
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into
the corresponding preset number
button.
- Program scanning
Press AS/PS button (18) shortly
to scan preset station, When the
field strength level is more than the
threshold level of stop level, the
radio is holding at that preset
number for several seconds with
release mute, then searches again.

STATION STORING

Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
2ND beeps come out), current station
FM
is stored into the number button.
11
button(16)
(17)